craigslist | tools in detroit metro

re heaters

2010-01-08T00:44:48-05:00

lets get real if anybody pays 200 to 300 for used heaters your nuts for the people selling these heaters THIS IS CRAIGSLIST NOT HOME DEPOIT OR LOWES KEY WORD USED stop trying to rip people off because its winter peace out

honda gx160 5.5hp portable gas compressor (dearborn) $700

2010-01-08T00:40:00-05:00

\Honda gx 160 5.5hp gas compressor

8 gallon

pic coming soon

DEWALT & OTHERS 7.2V-36V NI-CD POWER TOOL BATTERY REBUILDS (LIVONIA) $20

2010-01-08T00:26:08-05:00

DEWALT & OTHERS 18V NI-CD POWER TOOL BATTERY REBUILDS

INFO:
WE REPLACE ALL DEAD CELLS IN BATTERY PACK USING YOUR ORIGINAL BATTERY PACK
PLEASE CALL US IF ANY QUESTIONS AT 248-677-5657 IF IN DOUBT PLEASE CALL

DETAILS:
THIS SERVICE IS TO REPLACE EVERY CELL IN POWER TOOL NI-CD BATTERY PACK CASE
WE USE 2200 MAH NI-CD CELLS
WE USE 2200 HIGHER OUTPUT CELLS WHICH OUTPERFORMS THE O.E.M. BRAND NAME CELLS
WE USE YOUR EXISTING BATTERY CASE PACK AND DISCARD OF ALL DEAD BATTERIES INSIDE
REPLACEMENT OF ALL INSIDE BATTERY CELLS
WE DO NOT REPLACE OUTSIDE BATTERY PACK CASE
WE REBUILD ANY BRAND NAME BATTERY PACK JUST SEND US YOUR DEAD BATTERY
ALL REBUILD NI-CD BATTERIES WILL WORK WITH YOUR EXISTING CHARGER
(NEED SHIPPING) HAVE YOUR BATTERIES REBUILT AND PAY THRU PAYPAL SEND US YOUR DEAD POWER TOOL NI-CD BATTERIES TO VHANYONKER 19212 LAUREL DR. LIVONIA, MI. 48152.
90 DAYS WARRANTY WITH DATED RECEIPT

Better/cheaper then original equipment manufacturer

Most O.E.M. are 1300mAh to 1500mAh

Price list for all brand new 2200 mAh battery rebuilds

7.2V 1 battery rebuilt 20.00 price break on 2 or more 15.00 each

8.4V 1 battery rebuilt 25.00 price break on 2 or more 20.00 each

9.6V 1 battery rebuilt 30.00 price break on 2 or more 25.00 each

10.8V 1 battery rebuilt 35.00 price break on 2 or more 30.00 each

12V 1 battery rebuilt 40.00 price break on 2 or more 35.00 each

13.2V 1 battery rebuilt 45.00 price break on 2 or more 40.00 each

14.4V 1 battery rebuilt 50.00 price break on 2 or more 45.00 each

15.6V 1 battery rebuilt 55.00 price break on 2 or more 50.00 each

16.8V 1 battery rebuilt 60.00 price break on 2 or more 55.00 each

18.V 1 battery rebuilt 65.00 price break on 2 or more 60.00 each

19.2V 1 battery rebuilt 70.00 price break on 2 or more 65.00 each

21.6V 1 battery rebuilt 75.00 price break on 2 or more 70.00 each

24.V 1 battery rebuilt 80.00 price break on 2 or more 75.00 each

All battery cells are replaced inside battery pack with brand new 2200mAh batteries.

All brand new 2200mAh batteries have longer run time and they work off your existing charger.

All battery rebuilds have 90 days warranty with dated receipt

You may inquire about shipping your old battery to me to rebuild for you

CALL FIRST: CELL 248-633-4471 Will LOCATION LIVONIA

car dollies (warren) $110

2010-01-08T00:02:42-05:00

brand new 2 sets of car dollies, total of 4 , 1 for each tire 110 or best

Arc Welder: Miller M-180 (220 volts) (N. Macomb County, MI) $200

2010-01-07T23:58:55-05:00

this arc welder works very well
welder is on a 4-wheel cart/dolly
both ground and electrode leads are very good condition
$200 obo
call any time (586-749-5003)

flat lumber dry wall plywood cart (rochester hills) $20

2010-01-07T23:49:10-05:00
same kind of flat cart used for plywwod and drywall at your favorite home center. I bought this from builders square when they went out. No wheels or casters ( used them on another project). Add four casters and you have the ultimate cart for moving lumber and supplies around your shop. Does have all four of the lift up side supports(see pic 3)

a steal at $20.00
sgmanning1927@yahoo.com

Craftsman 12in band saw/ sander (richmond) $150

2010-01-07T23:47:11-05:00
Clean and complete. Comes with stand with wheels, dust collector, and built in light. No blade. Have a printed owners manual. $150

(LIKE NEW) DEWALT TOOLS (Warren, MI) $400

2010-01-07T23:10:53-05:00
Dewalt Tools: 4 1/2"(115mm) HEAVY DUTY CORDLESS CUT-OFF TOOL $120.00 includes 18v battery

1/4"(6mm) cordless impact driver $200.00 includes like new 18v battery

3/8(10mm) vsr drill 120v ac 50/60 Hz $50.00 ALL TOOLS LESS THAN 2 YRS OLD AND WERE RARELY USED THE DRILL WAS USED ONCE

pictures are available for serious inquirers (ALSO INCLUDES CAR CHARGER) $30

I cannot respond to emails that do not includes phone #s

586 258 8523 vic

Ladders (Sterling heights) $30

2010-01-07T23:05:23-05:00
These ladders are in good working order. Used, but functional and cheap. All 3 ladders for $25
Contact Reese @ 586-295-7868 with interest.

220 VOLT 3 HP ROCKWELL COMPRESSOR (CLINTON TOWNSHIP) $400

2010-01-07T23:03:54-05:00
QUIET TO RUN AND POWERFUL.

810 343 7199 PLEASE NOT AFTER 10PM

*MEDAL SAW *DRILL PRESS * BENCH SANDER (CLINTON TOWNSHIP) $75

2010-01-07T22:57:35-05:00
MEDAL SAW - $75
DRILL PRESS - $75
BENCH SANDER -$75

CALL 810-343-7199 PLEASE NOT AFTER 10 PM

BENCH TOP BAND SAW (CLINTON TOWNSHIP) $65

2010-01-07T22:37:48-05:00
WELL SAW JR 110 VOLT. MEDAL BAND SAW. USED TO CUT BAR STOCK STEEL. GOOD SHAPE. CALL 810-343-7199 FOR MORE INFO PLEASE NO CALLS AFTER 10.

TIRES (CLINTON TOWNSHIP) $75

2010-01-07T22:33:16-05:00
F150 STEEL WHEEL 5 LUG. TIRE IS A UNIROYAL LARADO. 255-70R16

CRYSLER PACIFICA WHEEL 5 LUG. TIRE IS A MICHELIN RADIAL XSE235-65R17

GM TRUCK STEEL WHEEL 5 LUG. TIRE IS A GOODYEAR WRANGLER. 235-75R16

ALL TIRES ARE BRAND NEW AND HAVE NEVER BEEN USED. $75 EACH

CALL 810-343-7199 FOR MORE INFO AND PLEASE DONT CALL AFTER 10 PM

Cordless drill and sawsall (Wayne) $100

2010-01-07T22:26:57-05:00
Milwaukee 18 volt cordless drill 2 batterys 1 is bad the other one new and charger and case and craftsman variable speed sawsall both for 100.00 firm will not separate them thanks call Steve @ 737.915.0898

Toro S-200 Snowblower (St. Clair Shores) $150

2010-01-07T22:01:00-05:00
I Have A Toro S-200 Snowblower For Sale. It Is A 3 HP, 20" Path With A Manual Pull Start. The Paddles Are In Very Good Shape And The Scraper Bar Is New. The Carb And Sparkplug Have Just Been Cleaned. It Starts And Runs Very Good. This Unit Is Very Clean And Runs Excellent. The Price Is $150.00. I Take Repairable Snowblowers In Trade. Be Ready For The Snow Coming Down Tonight. Please Call At 1(586)779-2634 Or 1(586)436-2830. Thanks For Flagging My Ad. With Your Help I Can Run The Ad More Often.

Ryobi Router (Eastpointe) $50

2010-01-07T21:59:43-05:00
Ryobi Router with stand and carrying case. $50 Please leave a message for Rickey @586-855-0489.

Kennedy toolbox (port huron) $150

2010-01-07T21:55:52-05:00
A good box.Call Wayne at 810-937-8935

CRAFTSMAN WOOD LATHE (12 INCH) (BROWNSTOWN) $150

2010-01-07T20:42:43-05:00
Craftsman wood lathe in very good condition, all complete, If interested, e-mail or call Don (734) 308-5681

1 1/2 Ton Lever Block Chain Hoist (Macomb) $125

2010-01-07T20:39:38-05:00
Used 1 1/2 Ton Lever Block Chain Hoist and is a ratchet type. The brand name is Tugit and is in good working condition. To contact me you can e-mail or call me at 586-506-9248.

Central Machinery Wood Lathe (Sterling Heights) $150

2010-01-07T20:31:59-05:00
NEVER USED - Central Machinery Wood Lathe - 14 X 40, Varible Speed - NEVER USED. Asking $150.00 or Best Offer.

Interested parties please call Bryon at (586) 713-8318. Thank you!

Model S-191 Jack Screw (Starrett) (Macomb) $15

2010-01-07T20:30:00-05:00
Slightly used Jack Screw in box. Contact me for further information via e-mail or call me at 586-506-9248.

Craftsman 10" Radial Arm Saw w/Stand (Sterling Heights) $150

2010-01-07T20:28:01-05:00
Older Craftsman Radial Arm Saw on Stand, 10" Blade, 24" Reach, All Axis Movement; Sturdy Machine; works very well. Asking $150.00 or best offer.

Interested parties please call Bryon at (586) 713-8318. Thank you!

Helarc Welding Supplies/Kits (Macomb) $150

2010-01-07T20:18:57-05:00
What I have up for sale is an assortment of tungsten tig electrodes, tig accessories kits (look at picture below) and welding handle. I have $150 listed but i will take a best offer. So you can contact me by e-mail or call me at 586-506-9248.

Craftsman Snowblower. 1year old (Sterling Hgts) $400

2010-01-07T20:06:37-05:00
Used 3-4 times last year, 24" clearing width, 6 forward & 2 reverse gears, ELECTRIC START, paid $650, lost job so its got to go

Mitutoyo Absolute Digimatic Caliper (Macomb) $100

2010-01-07T20:03:46-05:00
New Mitutoyo Absolute Digimatic Calipers and there are 2 available. Both come in cases and work great! You can contact me by e-mail or call me at 586-506-9248.

Craftsman oxy-Acetylene Welding & Cutting Torch (Emmett,MI) $150

2010-01-07T20:02:44-05:00
Craftsman oxy-acetylene welding and cutting torch, used very little.
3/16 x 20' twin hose, regulators and pressure gauges, handle and mixer
with accessories. asking $150.00 or best offer 586-855-6156

Garden/Lawn Weasel Cultivator (troy) $25

2010-01-07T20:01:37-05:00
Used once, Garden/lawn cultivator with with Detachable Blades and Two Handles. Designed bladed wheels crisscross as they rotate, creating a scissors-like action that uproots weeds and breaks up soil. The shearing action automatically cleans the no-rust alloy prongs, of dirt. The Garden Weasel mulches, weeds, cultivates, and top dresses soil. Breaks up the top 1.5� of soil to leave your plants� roots undisturbed or get the soil lossen for planting grass seed.

tool box 125 obo (lincoln-park) $1250

2010-01-07T19:59:53-05:00
this is a big tool box call ron 313-475-2195 125 obo

DRILL PRESS-16 SPEED (LIVONIA) $275

2010-01-07T19:57:45-05:00
MODEL DP-1617 3/4 INCH CHUCK BENCH MOUNT APPROX 36" TALL GREAT SHAPE i really do not want to send photos, if you are interested, google it, and, call to come see. also have radial arm saw, bench mounted belt sander, jigsaw. NOTE: I DO NOT WANT TO WASTE MY TIME E-MAILING RESPONSES, SO PICK UP THE PHONE 248.991.1805

Shop Dust Collector / Vacuum (Beverly Hills) $75

2010-01-07T19:52:48-05:00
Used Shop Dust Collector. 1/2 HP Dayton motor, 3450 RPM, 120 VAC, with a 3" intake hose, and a lawn vacuum bag on the air outlet. Works very well for woodworking dust collection. Mounted on 30 Gal metal drum. Questions via email, or 248.417.4011

SNOW BLOWER 2 STAGE NEW (CLINTON TOWNSHIP) $600

2010-01-07T19:50:41-05:00
TROY BUILT STORM 5024 2 STAGE 208 cc OHV, NEVER USED O9 MODEL WITH COVER. ELECTRIC START, ALL WHEEL DRIVE, 6 FORWARD, 2 REVERSE, 24" CLEARING WIDTH, 21" INTAKE HEIGHT, 12" SERRATED STEEL AUGER, 13" X 4" X-TRAC TIRES, ADJ. SKID SHOES. BRAND NEW, PAID $783.23 W COVER. ASKING $600.00 O.B.O. CALL 586-524-2373

4 Extra Heavy Duty Wilton C-Clamps (Roseville) $150

2010-01-07T19:50:31-05:00
I am selling 4 Wilton C-clamps. 2 are heavy duty 406's, which sell for about 40.00 each. The other 2 are extra heavy duty and sell for over 100.00 each. http://www.grainger.com/Grainger/items/5C833 This link leads to the specs for the clamps. I paid well over 300.00 for all 4 clamps. All 4 clamps are brand new and have never been used. They were purchased a while ago for a welding project that never materialized. Believe me, if I could take them back I would. But i no longer have reciepts and it has been over 5 months since they were purchased. I am asking 150.00 or best offer. My loss is your gain. Thanks for looking. Call or e-mail with any questions 586-206-8046 Mike

adjustable wrenches 18in and16in (brownstown) $90

2010-01-07T19:50:27-05:00
have two adjustable wrenches one 18in diamalloy and one 16in rare craftsman very good cond. $90. obo call 734-692-2698 thank you

Starrett Depth Micrometer (Macomb) $15

2010-01-07T19:48:46-05:00
Used Depth Micrometer with attachments. Contact me via e-mail or call me at 586-506-9248.

Mitutoyo Digital Micrometer (Macomb) $100

2010-01-07T19:41:09-05:00
Brand New 0-1 Digital Micrometer and comes in case. Switches from English to Metric and if you wish to contact me you can e-mail or call me at 586-506-9248.

Delta 12" Planer (Commerce) $125

2010-01-07T19:33:58-05:00
12 x 5.9" Delta Planer in excellent shape Model No. 22-540

I can be reached at kerrybarwick@att.net or 313-268-8156

new pro`115 reddy multi fuel torpedo heater (warren) $300

2010-01-07T19:19:59-05:00
new reddy brand hsi multi fuel torpedo heater! awesome and reddy to work for you! will heat up to 4000 sq ft no prob! price is 300 firm but its a nice dependable reddy unit!! 586-563-8589

Wagner wide shot (Roseville) $45

2010-01-07T19:17:18-05:00
Brand new Wagner wide shot, with bilt in radio tool box. you can call me at 584-248-1190. thanks

60,000 btu multi fuel reddy brand torpedo heater (warren) $130

2010-01-07T19:17:16-05:00
awesome working 60,000 btu reddy brand multi fuel torpedo heater! 586-563-8589 call when your ready to pick it up---price is 130 firm---thanks for your time.

pro 200t black! multi fuel reddy brand topredo heater! 200,000 btus! (warren) $375

2010-01-07T18:55:48-05:00
if your looking for an awesome super duper multi fuel heater for that very large shop/garage/warehouse look no further! im selling my 200 black!! its got all the bells and whistles! low fuel indicator/led temp readout/its a multi fuel 200,000 btu torpedo heater! has a new circuit board and hot surface ignitor! will work awesome for that large open cold area when you need it most!! price is 375 firm--i have a few other smaller units for sale as well---i buy/sell/trade/repair and have many nos parts for these as well! if you need something let me know! 586-563-8589

Dewalt DC4PAKA 4pc 18V Tool Set w/Case (Mount Clemens, MI) $350

2010-01-07T18:47:03-05:00
I have a Dewalt 4 piece 18 volt set for sale. These sell new for $499. This one has not been used, but can't be sold as new. Everything in the set looks and feels new.

Feel free to call me at 586-668-0018

* Includes / Features:
* Dewalt 18V Tool Set
* Model: DC4PAKA
* DC390 6.5" Cordless Circular Saw
* 6.5" Wood cutting Blade
* DC385 Reciprocating Saw
* DW4876 5/8" BI-Metal Blade
* DC925 1/2" Cordless Drill/Driver/Hammerdrill
* Side Handle
* DW919 Rechargeable Light
* 2- Dewalt XRP 18Volt Battery packs
* DW9116 7.2-18V 1 Hour Charger
* Dewalt Black Hard Carrying Case

Condition:

* 99% overall Cosmetic Condition
* Set was used a Demo
* Drill shows sign of being handled
* All tools are in working order

If you were in the market for one of these sets, this is a good way to save a few dollars.

Spray Gun (Shelby Twp.) $150

2010-01-07T18:20:06-05:00
Spray Gun - Portable contact cement tank

Homelight 10in Chain Saw (Shelby Twp) $30

2010-01-07T18:10:16-05:00
Homelight 10in Chain Saw - May need tune up and sharpening.

Landscape Trailer 16x9 Double Axle/Drop Gate (Ortonville) $1050

2010-01-07T18:07:02-05:00
Well maintained Double Axle Trailer with sides....

Just used last season... shes ready to haul......
Call John for details... 248 245 2295

Radial Arm Saw - Sears Craftfman (Shelby Twp) $75

2010-01-07T18:02:15-05:00
radial arm saw - sears craftsman

42in snow blade (New boston - carlton) $100

2010-01-07T18:00:24-05:00
42 inch snow plow blade, fits craftsman. Complete with tire chains and wheel weights
100$ firm
Edd 724-654-6709

Delta Shopmaster AP100 Air Filter - $139.99 (Mt. Clemens) $139

2010-01-07T17:54:05-05:00

We currently have available a Delta Air Filter Shopmaster Model #AP100. The DELTA AP100 ShopMaster Air Filtration System with Work Light quietly cleans the air you breathe as you work, with a 120-volt induction motor that filters through 450 CFM. It is designed with a two-stage filtering system that includes a pre-filter to capture large pollutant particles, followed by a pleated five-micron inner filter to trap invisible irritants and finer debris. Both useful and discreet, the filtration system features eye-bolts for easy ceiling suspension, an easy-grip portable handle, and two integrated florescent lights that illuminate your shop.Dual pull cords control the fan and lights, while the six-foot power cord ensures its usability.

Please call with any questions you may have. Thank You

stihl 760 concrete saw (berkley) $400

2010-01-07T17:46:55-05:00
for sale is a great running stihl concrete saw. oldie but solid. has a metal cutting blade (does come with that but not the concrete diamond blade) no water attachement. has new rubber feet. runs great. this is the all metal unit no plastic. serious buyers only. call 248-766-7672

MK GAS SAW 14" Honda (Shelby Twp.) $1100

2010-01-07T17:41:07-05:00
I have a like new 14" MK saw Table saw with Honda motor. Belt driven water pump. Saw is like new. 1,100.00 Email if interested.

10" craftsman table saw (Shelby Twp.) $55

2010-01-07T17:25:19-05:00
10 Craftsman tablesaw 55.00 firm also see my other tools under " trim carpentry tools" Dewalt air compressor , Milwaukee 10" miter saw. and nailguns. Need to make room in my garage. Thanks for looking, You can reach me on my cell at 586 214-9589

***Industrial Towable Diesel Generator *NEW* Baldor TS250T 200KW*** ((wayne co)) $47200

2010-01-07T17:24:33-05:00

siufsdsdlsdlksdkjsdklklxcliocxxcoixcixopzxzpovxopivxopcvoxcivxciuxvuixcoiuxiouxcviouxcivouxviouxcoiuxcuvxcovixcvoixcvsjkfhwembsmnfewmn.

mnwermnwenbwmenmbwerbwesdfksjdflksjasoifjweoifioufisofuifisuyuisydfyusdfsdusdoiuffwefpoipoisdpoifwaefwoiefoiuweoiuwfiuoeiofuisoisdksj.

FOR SALE (DETROIT)

2010-01-07T17:24:02-05:00
FOR SALE MATCO DETERMINATOR SCAN SYSTEM WITH CASE AND ALL ATTACHMENTS.

PLEASE CALL 313-293-8405

Reddy Heater 55 (Belleville) $150

2010-01-07T17:23:49-05:00
55,000 BTU Works Great, Looks like new. $150.00 obo
Rick at 734-231-4429

Old drill bore bits for wood (Plymouth) $15

2010-01-07T17:18:39-05:00
Old drill bore bits for wood
Over 25 bits - $15
We can buy and trade for Lionel & American Flyer trains.
We are also looking to 1950 Ford car sheet metal.
734-459-5243 before 9:00 PM
Have a great day!

Radial arm saw accessories (Lakeside mall area) $95

2010-01-07T17:06:14-05:00
I have four accessory items for a 1961 sears radial arm saw. The accessories will most likey work on any radial arm saw or 5/8" arbor. What I have is: a Dado set, a molding cutter set, a shapper, and two 12" saw blades. The saw blades have been professionally sharpened (one is carbide tipped). I want $95.00 for all of them combined but will sell any combination for a reasonable offer. I may also be able to get the radial arm saw if you are really interested. It was given to a friend of my son's in a swap and may be still available.

Joe

Nine (9) inch saw blades

2010-01-07T17:05:57-05:00
Eight saw blades for a table saw, radial arm saw, or miter saw. Three of the nine are carbide tipped. They were all sent out and professionally sharpened. I would like $3.00 apiece for they non-carbide and $6.00 for the carbide tipped ones.

Joe

Snap on ,Set, Puller, Master Interchangeable (Flint, Cut Rate Auto Parts) $2000

2010-01-07T17:01:03-05:00
Set, Puller, Master Interchangeable (With tool control board/wall cabinet)
The item is used decent working condition.

glass has a crack,
Missing a few pieces.
$2000.00

NO TRADES
NO SPAM

Porter Cable CPFAC2600P 150 PSI, 6 Gal. Oil Free Pancake Compressor (madison heights) $75

2010-01-07T16:53:51-05:00
Porter Cable CPFAC2600P 150 PSI, 6 Gal. Oil Free Pancake, in good working condition,
stop by and tested at

simons PAWN AND LOAN
28075 JOHN R RD
MADISON HEIGHTS MI 48071

248-542-5921

CUTOFF Makita DPC7311 14 in. Power Cutter - 73cc (MADISON HEIGHTS) $500

2010-01-07T16:50:14-05:00
Makita DPC7311 14 in. Power Cutter - 73cc, IN GOOD WORKING CONDITION. WITH BLADE, USED ON 2 JOBS, SELLING FOR A FRIEND.
SUPER NICE, STOP BY AND TESTED OUT AT SIMON PAWNSHOP
28075 jOHN R RD
MADISON HEIGHTS MI 48071

248-542-5921
MON-SAT FROM 9.30-5.30

AIR JACK (2) Price is each (Carleton) $100

2010-01-07T16:45:39-05:00
2 AIR JACKS FOR SALE

$100.00 EACH

Senco Roofing Nail Gun (tools) $100

2010-01-07T16:41:05-05:00
Senco Roofing Nail Gun,used 3 times like new , $100 firm ,, 313 948 2494

INGERSOLL-RAND AIR HAMMER (Harrison Township) $63

2010-01-07T16:36:43-05:00
Brand new in the box ingersoll-rand air hammer model number IR121.100.00 new.Will sell for 63.00 Thanks.586-344-3457

***Cornwell Tool Box*** (Macomb) $500

2010-01-07T16:30:46-05:00
Cornwell professional grade Tool Box.

Roll Cart Style with 4 drawers and side shelf.

This also has a side locking bracket for holding air tools.

Only 3 years old like new.

Tools in the pictures are not included in the sale.

I'm posting this for my Father so please call the number below.

NO E-MAILS

Call any time to inquire.
586-228-7022

Vintage Skil Radial Arm Saw with stand (Madison Heights) $500

2010-01-07T16:28:54-05:00
For Sale is a Vintage Skil Corp. Radial Arm Saw in excellent condition (owner since new)
Hate to get rid of it, but i have no use for this saw anymore.

Specs.
2 H.P.motor, single phase, 22/11 amp,115/230 volts A.C.,
60 cycles, 3500 R.P.M., 24 in of travel

$500

please feel free to contact me for any questions 586-524-2646 Tim

_________________________NEW gearwrench 4 pc sae double box wrench set $40

2010-01-07T16:25:04-05:00
Brand new in the plastic tray

Call Chuck 248-250-0115 --- Thanks

Snow Blower (Sterling Heights) $265

2010-01-07T16:23:18-05:00
Yard Machine 21" Single stage snow thrower Used last year only. DON'T SHOVLE THS SNOW WE ARE GETTING RIGHT NOW! :) PRICE IS FIRM. DON'T GO TO LOWES AND PAY 100 MORE FOR THE EXACT SAME MACHINE. 248-390-1495

Thanks,
Pete

Craftsman twin track snowblower 4hp/20 inches wide. check it out!! (SE MI.) $175

2010-01-07T16:18:53-05:00
Here we have a twin track snowblower only used on sundays by my grandma! Ha! just kinding craftsman twin track snowblower has six forward speeds two reverse speeds. Runs good. No air deflector on the carb, doesn't affect it but i thought i'd let you know.Tracks are in great shape, Chute has been fixed( had a crack) and is working like it should. One handle in home made.IF YOU NEED A NEW PERFECT ONE THIS ONE IS NOT FOR YOU !!!! IF YOU NEED A SNOW BLOWER THAT WILL RUN AND BLOW SNOW THEN SEND ME YOUR NUMBER. If you are interested and want to talk feel free to send me your number and a time to call. emails without a number will not be answered do to spam. TO highlight my ad, NOT PRETTY but works, just got done doing my drive with it.
CASH ONLY WOULD TRADE FOR RUNNING BRAVO OR ENTICER SNOWMOBILE.

Cyclone Grinder Kit (Macomb) $300

2010-01-07T16:16:13-05:00
Brand New Ingersoll Rand Grinder Kit and never been used! Model number CD250RG4K and comes in case with all accessories. Any questions feel free to e-mail me or call me at 586-506-9248.

Husky Air Compresser - $159.99 (Mt.Clemens) $160

2010-01-07T16:11:50-05:00

We currently have available a Husky Air Compresser.
Specs: 26gal air tank, 155psi max, 1.5hp motor

Please call with any questions you may have. Thank You

WERNER 13 FT.MULTILADDER-RATED 300 LBS.(LIL.GIANT=$319) (TROY) $75

2010-01-07T16:10:52-05:00
WERNER 13 FT. MULTILADDER FOR ONLY $75---BRAND NEW IN WRAPPER---THREE AVAILABLE--COMPARABLE LITTLE GIANT WITH 300 # CAPACITY IS $319.80 ON AMAZON .COM----17 MILE & ROCHESTER ROAD AREA--TROY--LV. MSG. IF N/A ON CELL # --DAVE--248-895-5000

tire machine (detroit) $1000

2010-01-07T16:07:23-05:00

tire machine works good.call me at 313 721-0611.

Tilman Tig Welding Gloves (Size Large) (Macomb) $15

2010-01-07T16:05:48-05:00
Brand new pair of welding gloves with serial number 1328 L on the gloves. Any questions e-mail me or call me at 586-506-9248.

hitachi roofing gun (downriver) $75

2010-01-07T16:02:22-05:00
I have a used roofing gun hitachi it looks used but works good I just bought it off here a month ago for a roof job and we just finished and I have no use for it no more $75.00

Craftsman 1hp Drill Press - $149.99 (Mt.Clemens) $150

2010-01-07T16:00:47-05:00

We currently have available a Craftsman 1hp Drill Press.

Please call with any questions you may have. Thank You

Starrett Center Finder (Macomb) $20

2010-01-07T15:58:30-05:00
Slightly used center finder and is a complete set. The model number is S-828H and if you wish to contact me you can e-mail me or call me at 586-506-9248.

Starrett Edge Finder (Macomb) $15

2010-01-07T15:52:27-05:00
Slightly used Mechanical Edge Finder with .500X.200 inches. Comes in red pouch for storage. To contact me you can e-mail or call me at 586-506-9248.

Electronic Edge Finder (Macomb) $50

2010-01-07T15:44:59-05:00
Slightly used Electronic Edge finder with .400X.750 inch shank. Comes with instructions and in plastic case. To contact me you can e-mail me or call me at 586-506-9248.

welder and torches for sale (taylor) $600

2010-01-07T15:38:41-05:00
for sale i have a century mig welder and i also have a set of cutting torches i would like 600.00 for both or 350.00 each brand new regulator and gauges for welder still in package never used yet the gauges and regulators for torches are bluepoint whitch is made by snap-on tools . only serious inquirerys need respond no low ballers dont wast my time call 734-213-6421 or e-mail johnhat@yahoo.com . thanks .john

compression tester (Westland) $20

2010-01-07T15:34:13-05:00
Brand new in case only used once.

phone --- 734-629-8944

email --- c.rollinz@yahoo.com

crafstman (ferndale mi) $400

2010-01-07T15:33:52-05:00
i have a craftmans planner and a table saw for sale both steel frames in very very good shape 400.00 obo

Starrett Jack Screw (Model S190) (Macomb) $15

2010-01-07T15:31:01-05:00
Slightly used Jack Screw in box. Contact me for further information via e-mail or call me at 586-506-9248.

engine stand (Westland) $25

2010-01-07T15:28:32-05:00
standard engine stand w/wheel and rotating mount.

phone --- 734-629-8944

email --- c.rollinz@yahoo.com

600 Gallon "Garlock" Asphalt Kettle (Pumper) (Southfield) $3500

2010-01-07T15:25:16-05:00
600 Gallon Garlock Asphalt Kettle Pumper. Newer Honda Motor, includes 80' of pipe, two mop buckets,etc. Good condition and ready to go to work! Please call (248) 353-0094

BRAND NEW FULL-BODY HARNESS (WESTLAND) $75

2010-01-07T15:19:35-05:00
I HAVE A NEW FULL-BODY HARNESS FOR SALE, I PAID ALMOST $300 FOR IT. ITS IN PERFECT CONDITION $75 OBO

Cambell Hausfield Compressor and Bostitch Roofing Gun $150

2010-01-07T15:18:33-05:00
Sold together only...Both work great....serious only 810-479-2551

AIR COMPRESSOR HUSKY 5.5 Horsepower 150 PSI (Lincoln Park) $175

2010-01-07T15:17:49-05:00
Husky Air Compressor 5.5 Horsepower - 150 psi - 26 Gallon - Vertical or Horizontal Standing
in nice condition, I bought it from a friend and don't use.
Call Bill 313-304-4148

28,000 BTU propane heater/40 gal. tank (detroit east) $100

2010-01-07T15:11:02-05:00
I used to work in my garage and this heater always kept me nice and warm. The picture was taken today. There is propane in the tank.
I really hate to let it go but it's one of those tools I may never use again.
If you're tired of working in the cold this heater is just the ticket. If you've priced comparable units you'll see that a hundred bucks is a real good price.
call 313 882 8349 ask for Mr. Frank.

Honda generator EU2000i new (Clarkston) $850

2010-01-07T14:53:16-05:00
Brand new 2000 watt Honda generator EU2000iA

�2000 watts, 120V
�Ideal for TV/DVD, satellite, fridge, coffee pot, and more
�Super quiet
�Easy to carry - less than 47 lbs!!
�Fuel efficient - up to 15 hrs on 1 gal of gas
�Inverter - stable power for computers and more

MSRP $1,099.95*

Call Richard 248-321-0744

Miller Thunderbolt AC-DC Arc Welder (Livonia) $200

2010-01-07T14:52:49-05:00
AC 30-230 amps
DC 20- 150 amps

Style- JF878868

Condition- Good to Excellent

Cell (734) 306- 0949

TRANS AND COOLANT FLUSH MACHINES (HAMBURG, MI)

2010-01-07T14:32:20-05:00
2 TRANSMISSION FLUSH MACHINES AND 1 COOLANT FLUSH MACHINE FOR SALE. BEST OFFER. CALL AND WILL DISCUSS WHICH MACHINES THEY ARE AND YOU MAKE AN OFFER.
(810) 599-3312

Dewalt 24 volt cordless circular saw (Fraser) $75

2010-01-07T14:32:19-05:00
Like brand new 24 volt dewal cicular saw 1 battery and charger model # dw007 battery is in great shape comes with case price is less than battery sells for alone saw has 7" blade and case.

Welding Table 4' x 8' 1 1/2" thick (Fraser) $650

2010-01-07T14:22:05-05:00
Steel welding table stands 22" high (sit down style) Taking up too much room in our shop for the amount of use it gets we need it gone. Weight 2000 lbs we can load at our end.

Delta Wood Lathe & Duplicator (Columbus)

2010-01-07T14:20:23-05:00
Delta steel bed 1642 wood lathe with duplicator. $1450.00.

Cell Phone Accessories

COATS rim clamp-5030 TIRE MACHINE (hazel park 9 mile& I-75) $1700

2010-01-07T14:17:10-05:00
coats rim clamp 5030 tire changer which is in really good condition. It works great.asking 1700$ OBO.
local pick-up only.

__________New $30 General precision protractor angle gauge made in USA $20

2010-01-07T14:15:46-05:00
Brand new --- never used --- $20

Call Chuck 248-250-0115 --- thanks

Aluminum ladders (Southwest Detroit) $100

2010-01-07T14:03:26-05:00
I have a 24 foot aluminum extension ladder and a 6 ft step ladder both in good condition. 24ft=$80.00 6ft $20.00 or $90.00 for both. Call Steve 1-313-670-4693 Thanks for looking.

___________________________________NEW Gearwrench 4 pc TORX wrench set $40

2010-01-07T13:58:13-05:00
Brand new --- never used --- in the plastic tray

These cost a lot more off the tool truck

Call Chuck 248-250-0115 --- thanks

Work Bench &Vise (Sterling Hts.)

2010-01-07T13:48:31-05:00
Work Bench
and Vise

Size: 60 x 30

$200.00/OBO

Additional work benches ( several sizes)
also available

Contact ---586 264-9400 e127

open end wrenches (allen park) $1

2010-01-07T13:43:28-05:00
Have alot of extra will sell for 50 cents each call 313 551-4750

Clark Orbital floor sander (Clarkston) $600

2010-01-07T13:31:45-05:00
I have a Clark Orbital floor sander for sale.
This thing works wonderfully.
I picked it up from someone moving out of town.

You will love this thing.

Call Brian @ 248 939 1194

Clarke-American Sanders is recognized as the world leader in the floor refinishing equipment industry.
Clarke-American Sanders has been producing floor sanding equipment for over 90 years.
This machine can also be used for wood deck sanding.

* Large non-marking transport wheels
* Heavy cast iron frame supplies weight for aggressive performance
* Dust control version eliminates annoying dusty operation
* Small 1/4 in (.635cm) orbit produces finer finish
* Precision balanced for smooth operation
* Available in standard (OBS-18) or dust control version (OBS-18DC)
* Totally enclosed dust free motor

That last bit of stuff is from their web site.
Brian