favorite
favorite
hide
unhide
flag

Posted

print

New YAESU FT-100D, FP-1030A Ham Amateur Radio Bundle - $800 (White Lake)

New YAESU FT-100D, FP-1030A Ham Amateur Radio Bundle 1 thumbnailNew YAESU FT-100D, FP-1030A Ham Amateur Radio Bundle 2 thumbnailNew YAESU FT-100D, FP-1030A Ham Amateur Radio Bundle 3 thumbnailNew YAESU FT-100D, FP-1030A Ham Amateur Radio Bundle 4 thumbnailNew YAESU FT-100D, FP-1030A Ham Amateur Radio Bundle 5 thumbnailNew YAESU FT-100D, FP-1030A Ham Amateur Radio Bundle 6 thumbnailNew YAESU FT-100D, FP-1030A Ham Amateur Radio Bundle 7 thumbnailNew YAESU FT-100D, FP-1030A Ham Amateur Radio Bundle 8 thumbnail
condition: new
make / manufacturer: YAESU
model name / number: FT-100D and FP-1030A
New FT-100D Mini Transceiver and FP-1030A Power Supply bundle.

*Components are new in original packaging *

* FT-100D Mini Transceiver *

Since its introduction, Yaesu's FT-100 HF/VHF/UHF Transceiver has been widely acclaimed for its outstanding performance and flexibility. Now the FT-100D builds on this success story, adding the convenience of factory-installed modules for today's Ham on the go!

Now including. . .
• Built-in XF-117C 500 Hz CW Filter • Built-in TCXO-8 High-Stability Reference Crystal • Built-in FTS-27 CTCSS Decoder Unit • Large, High-Quality Speaker

Rugged, High-Output Transmitter Design
The FT-100D's power amplifier section utilizes MOS FET devices, providing low noise, low distortion, and high reliability. The HF/50 MHz section produces 100 Watts of output, while the VHF/UHF section generates 50 Watts of power on 2 meters, and 20 Watts on 70 cm.
High-Performance Receiver Design
Building on the acclaimed performance of the FT-1000D, FT-1000MP, and FT-847, the Yaesu design team have crafted the FT-100D's front end for a very low noise floor and wide dynamic range. Utilizing an up-conversion architecture for HF with a 68.985 MHz first IF, the FT-100D features a double-conversion superheterodyne system (triple-conversion on FM) with the second IF at 11.705 MHz.
Digital Signal Processing (DSP)
For superior interference rejection and transmitter "talk power," the FT-100D's DSP circuitry enhances both sides of the communications circuit. The FT-100D's DSP Unit features a 24-bit high-tech D/A chip for signal processing, and includes bandpas filtering, noise reduction, notch filtering, and a microphone equalizer.
Advanced Features for Active DXers
Boasting features typically only found on much larget base station transceivers, the FT-100D includes IF Shift, a highly-effective IF Noise Blanker, Intercept Point Optimization for strong signal environments, VOX, a Clarifier (RIT), Adjustable AGC, and an RF Gain control for precise setting of the receiver gain.

* CW Operating Flexibility
For the CW lover, the FT-100D includes such popular features as a built-in iambic keyer, CW message memory, full QSK, CW "reverse sideband" capability, CW Pitch control, and the availability of an ultra-narrow 300 Hz crystal, model XF-117CN (a 500 Hz CW filter is built in).


* FP-1030A Power Supply *

Product Line: Yaesu FP-1030A Power Supplies
DXE Part Number: YSU-FP-1030A
Power Supply Type: Linear, Regulated

Power Supply Continuous Output: 23A at 13.8 Vdc
Power Supply Peak Output: 30A at 13.8 Vdc
Power Supply Voltage Adjustment Control:None
Power Supply Voltage Adjustment Range:Non-adjustable

Power Supply Metering Type: Dual meters
Power Supply High Current Terminal Location: Front panel
Power Supply Low Current Terminal Location: Front panel

Power Supply Lighter Socket: Yes
Power Supply Cooling Type: Fan

Yaesu FP-1030A Power Supplies are high-quality, regulated DC power supplies specifically designed for use with DC-powered radio equipment. Their fixed 13.8 volt output is 25 rated at amps continuous and 27 amps at the protection point.

These supplies use a temperature-controlled cooling fan that is both quiet and reliable. These linear-circuit supplies use no switching circuitry and are very RF-hash silent. Output ripple at full 25 amp load is only 3mV peak to peak, indicating high-level regulation.

Additional features:

* A current fold-back circuit is utilized to prevent damage to the unit from excessive current drain.

* FP-1030A includes extensive filtering to provide high immunity from erratic operation which might be caused by Radio Frequency Interference (RFI).

* Beside the two pairs (6A) of snap-in DC connections and the (25A) screw-on DC output terminal, FP-1030A supplies feature a cigar-lighter/12V outlet-type DC output jack for radio equipment equipped with a matching cigar-lighter plug.

post id: 7737282404

posted:

updated:

best of [?]

loading
reading
writing
saving
searching