try the craigslist app » Android iOS
favorite
favorite
hide
unhide
flag

Posted

print

Di-Acro Punch and Die Tooling in a Steel Case, Punch Pak 2 -- 56 pcs. - $1000 (West of Wayne County)

123
Di-Acro Punch and Die Tooling in a Steel Case, Punch Pak 2 -- 56 pcs.

Here is a list of all the punches and Dies in this set

Punch Set no 2
Di-Arco Punch Pak 2 w/ 56 pcs vs. Normal 51 pcs

Punch Die Comments
Punch Holder Holder or Die
No of Diameter OD Size OD Size Size in
Pieces Inches Inches Shape Die Inches Inches
2 0.061 0.5 Round Size A 1.25" OD x 5/8"
2 0.125 0.5 Square Size A 1.25" OD x 5/8"
2 0.250 0.5 Round Size A 1.25" OD x 5/8"
2 0.310 0.5 Square Size A 1.25" OD x 5/8"
1 Missing 3/8" 0.5 Round Size A 1.25" OD x 5/8" 0.3825
2 0.435 0.5 Round Size A 1.25" OD x 5/8"
2 0.500 0.5 Round Size A 1.25" OD x 5/8"
2 0.625 1.0 Round Size A 1.25" OD x 5/8"
2 0.750 1.0 Round Size A 1.25" OD x 5/8"
2 0.500 1.0 Square Size A 1.25" OD x 5/8"
2 0.875 1.0 Round Size B 2.125" OD x 7/8"
2 1.000 1.0 Round Size B 2.125" OD x 7/8"
2 0.750 1.0 Square Size B 2.125" OD x 7/8"
2 0.815 1.0 Square Size B 2.125" OD x 7/8"
2 1.000 1.0 Square Size B 2.125" OD x 7/8"
2 1.125 1.0 Round Size B 2.125" OD x 7/8"
2 1.250 1.0 Round Size B 2.125" OD x 7/8"
2 1.375 1.0 Round Size B 2.125" OD x 7/8"
2 1.500 1.0 Round Size C 2.75" OD x 1 5/32"
2 1.625 1.0 Round Size C 2.75" OD x 1 5/32"
2 1.750 1.0 Round Size C 2.75" OD x 1 5/32"
2 1.875 1.0 Round Size C 2.75" OD x 1 5/32"
2 2.000 1.0 Round Size C 2.75" OD x 1 5/32"
2 0.625 1.0 Square Size C 2.75" OD x 1 5/32" Extra Die
1 None Round Size C 2.75" OD x 1 5/32" Adapter to Hold Size A Die
2 0.560 1.0 Square Size B 2.125" OD x 7/8" Extra Punch and Die
2 0.432 1.0 Square Size A 1.25" OD x 5/8" Extra Punch and Die
1 1.0 Square Size A 1.25" OD x 5/8" Extra Die @ ~.3513"
1 Steel box
56 Total No of Pieces


The steel case is 20" x 9" x 4" and has two cam action door latches that are similar to a tool box latch and a steel carrying case handle. Total weight of the tooling and case is ~42 lbs. All of the tools except for the extra square tools have cut outs in the steel case to hold both the punches and dies.
This Punch and Die set is designed for 16 gage steel so all dies are supplied with a standard clearance of .008" required for 16 gage steel.. The punches are all designed to be held by the 1" diameter shank. All of the dies are designed to be held in a 2 ¾" OD x 1.16" thick round puck shaped tool.

All tooling is made by Di-Acro Houdaille, Lake City, MN. New cost for the normal Punch Pak 2 is $3040 however this set is available for $1,000, reduced down from $1,700 which is the price that I sold two others. This includes the extra 4 punches and dies detailed above in this posting.

This tool set is designed to be used in the Di-Acro manual arbor press no 1 or 2 with a normal capacity of 4 tons. This tooling will also work on Roper Whitney arbor presses and punch presses. All of the tools have a center punch for ease in locating the punch point on the work piece. The punches also have a "rooftop shear" which reduces the required tonnage by 50%.

The die holder that is missing would be made of any soft tool steel 2.75" OD x 1.16" thick with a .8730" through hole and 1.255" diameter hole countersunk from one side 9/16" deep. There is also a 5/16' x 20 set screw that is 3/8" from the edge to lock in the 1.25" x .6160" thick dies. This missing die holder is shown in the last three pictures which shows a borrowed die holder.

This set of tooling is available for $1000 CASH reduced down from $1700!

Please contact Tom at seven-three-four Area Code 751 and 4763 or E-mail me at tchurche @ my yahoo.com account with any questions.

  • do NOT contact me with unsolicited services or offers

post id: 7051953262

posted:

updated:

best of [?]